Trim, Baseboard and Molding

Repairing trim, baseboard, and molding inside a home typically follows a straightforward but detail oriented process. Attention to detail is key during every step—precise cuts, a careful paint job, and smooth caulk lines are what separates a patchwork repair from a professional result. This ensures that repaired trim, baseboards, and molding blend perfectly with the rest of the room, both in appearance and durability.

Repair and Painting

First, any damaged sections are carefully assessed to determine whether they can be repaired in place or need to be removed and replaced. Smaller dings, holes, or cracks are usually filled with wood putty or spackle, then sanded smooth once dry, to blend with the existing surface.

For sections that are warped, split, or rotten, the problem piece is pried away, gently using a pry bar or similar tool, taking care not to damage the wall or surrounding finishes. New trim or molding is cut to size, matching the original profile as closely as possible. The replacement piece is secured with nails or adhesive. Then the seams are caulked to ensure a seamless look.

After repairs or replacement, all surfaces are sanded as needed to remove imperfections and ensure a crisp finish. Gaps between the trim and wall are sealed with paintable caulk. Finally, the entire area is primed and painted to match the existing colors, or in some cases, all the trim may be repainted for a uniform appearance.

Painting

Painting trim, baseboards, and molding inside a home is a detail oriented process that brings a polished, finished look, to any interior space. The goal is crisp, clean lines, and a uniform, durable surface that stands up to everyday scuffs and cleaning.

The process starts with preparation, which is just as important as the painting itself. First, all surfaces are inspected for damage—holes, dents, or old, flaking paint. Any imperfections are filled with spackle or wood filler, allowed to dry, and then sanded smooth. Next, the surfaces are carefully cleaned to remove dust, grease, and debris. Painter’s tape is applied along the edges where the trim meets the wall or floor to ensure sharp lines and to protect adjacent surfaces.

Once everything is prepped, a high-quality primer is typically applied, especially if the trim is bare wood, stained, or previously painted in a dark color. Primer helps with coverage and adhesion, ensuring the finish coat looks even and lasts.

After the primer dries, it’s time for paint. We use a semi-gloss or high-gloss finish for trim, baseboards, and molding, as these finishes are more durable and easier to wipe clean. The paint is applied using an angled brush, which offers control for cutting in around edges and corners. Multiple thin coats are usually better than one thick one; each coat is allowed to dry fully before lightly sanding and wiping clean for the next.

Patience is key—rushing the job usually leads to drips, uneven coverage, or brush marks. When the final coat is dry, the painter’s tape is carefully removed while the paint is still slightly soft, ensuring the crispest lines. The result is trim, baseboard, and molding that frame the room cleanly and stand up beautifully to daily wear and tear.

Done well, this work can make a room look instantly brighter and more refined, highlighting your home’s architectural features with elegance and finishing the space with a subtle but unmistakable sense of craftsmanship.